View Source wxToolBar (wx v2.4.3)
A toolbar is a bar of buttons and/or other controls usually placed below the menu bar in
a wxFrame.
You may create a toolbar that is managed by a frame calling wxFrame:createToolBar/2. Under Pocket PC, you should
always use this function for creating the toolbar to be managed by the frame, so that
wxWidgets can use a combined menubar and toolbar. Where you manage your own toolbars,
create wxToolBar as usual.
There are several different types of tools you can add to a toolbar. These types are controlled by the ?wxItemKind enumeration.
Note that many methods in wxToolBar such as addTool/6 return a wxToolBarToolBase* object.
This should be regarded as an opaque handle representing the newly added toolbar item,
providing access to its id and position within the toolbar. Changes to the item's state
should be made through calls to wxToolBar methods, for example enableTool/3. Calls to wxToolBarToolBase
(not implemented in wx) methods (undocumented by purpose) will not change the visible
state of the item within the tool bar.
After you have added all the tools you need, you must call realize/1 to effectively construct and
display the toolbar.
wxMSW note: Note that under wxMSW toolbar paints tools to reflect system-wide colours.
If you use more than 16 colours in your tool bitmaps, you may wish to suppress this
behaviour, otherwise system colours in your bitmaps will inadvertently be mapped to system
colours. To do this, set the msw.remap system option before creating the toolbar: If you
wish to use 32-bit images (which include an alpha channel for transparency) use: Then
colour remapping is switched off, and a transparent background used. But only use this
option under Windows XP with true colour:
Styles
This class supports the following styles:
wxTB_FLAT: Gives the toolbar a flat look (Windows and GTK only).
wxTB_DOCKABLE: Makes the toolbar floatable and dockable (GTK only).
wxTB_HORIZONTAL: Specifies horizontal layout (default).
wxTB_VERTICAL: Specifies vertical layout.
wxTB_TEXT: Shows the text in the toolbar buttons; by default only icons are shown.
wxTB_NOICONS: Specifies no icons in the toolbar buttons; by default they are shown.
wxTB_NODIVIDER: Specifies no divider (border) above the toolbar (Windows only)
wxTB_NOALIGN: Specifies no alignment with the parent window (Windows only, not very useful).
wxTB_HORZ_LAYOUT: Shows the text and the icons alongside, not vertically stacked (Windows and GTK 2 only). This style must be used with
wxTB_TEXT.wxTB_HORZ_TEXT: Combination of
wxTB_HORZ_LAYOUTandwxTB_TEXT.wxTB_NO_TOOLTIPS: Don't show the short help tooltips for the tools when the mouse hovers over them.
wxTB_BOTTOM: Align the toolbar at the bottom of parent window.
wxTB_RIGHT: Align the toolbar at the right side of parent window.
wxTB_DEFAULT_STYLE: Combination of
wxTB_HORIZONTALandwxTB_FLAT. This style is new since wxWidgets 2.9.5. See also overview_windowstyles. Note that the wxMSW native toolbar ignoreswxTB_NOICONSstyle. Also, toggling thewxTB_TEXTworks only if the style was initially on.
See: Overview toolbar
This class is derived, and can use functions, from:
wxWidgets docs: wxToolBar
Events
Event types emitted from this class:
Summary
Functions
Equivalent to addCheckTool(This, ToolId, Label, Bitmap1, []).
Adds a new check (or toggle) tool to the toolbar.
Equivalent to addControl(This, Control, []).
Adds any control to the toolbar, typically e.g. a wxComboBox.
Equivalent to addRadioTool(This, ToolId, Label, Bitmap1, []).
Adds a new radio tool to the toolbar.
Adds a separator for spacing groups of tools.
Adds a stretchable space to the toolbar.
Adds a tool to the toolbar.
Adds a tool to the toolbar.
Adds a tool to the toolbar.
Removes the specified tool from the toolbar and deletes it.
This function behaves like deleteTool/2 but it deletes the tool at the specified
position and not the one with the given id.
Enables or disables the tool.
Returns a pointer to the tool identified by id or NULL if no corresponding tool is
found.
Returns a pointer to the control identified by id or NULL if no corresponding control
is found.
Finds a tool for the given mouse position.
Returns the left/right and top/bottom margins, which are also used for inter-toolspacing.
Returns the size of bitmap that the toolbar expects to have.
Called to determine whether a tool is enabled (responds to user input).
Returns the long help for the given tool.
Returns the value used for packing tools.
Returns the tool position in the toolbar, or wxNOT_FOUND if the tool is not found.
Returns the default separator size.
Returns the short help for the given tool.
Returns the size of a whole button, which is usually larger than a tool bitmap because of added 3D effects.
Gets the on/off state of a toggle tool.
Inserts the control into the toolbar at the given position.
Inserts the separator into the toolbar at the given position.
Inserts a stretchable space at the given position.
Equivalent to insertTool(This, Pos, ToolId, Label, Bitmap, []).
Inserts the tool with the specified attributes into the toolbar at the given position.
This function should be called after you have added tools.
Removes the given tool from the toolbar but doesn't delete it.
Set the values to be used as margins for the toolbar.
Sets the default size of each tool bitmap.
Sets the long help for the given tool.
Sets the value used for spacing tools.
Sets the default separator size.
Sets the short help for the given tool.
Toggles a tool on or off.
Types
-type wxToolBar() :: wx:wx_object().
Functions
-spec addCheckTool(This, ToolId, Label, Bitmap1) -> wx:wx_object() when This :: wxToolBar(), ToolId :: integer(), Label :: unicode:chardata(), Bitmap1 :: wxBitmap:wxBitmap().
Equivalent to addCheckTool(This, ToolId, Label, Bitmap1, []).
-spec addCheckTool(This, ToolId, Label, Bitmap1, [Option]) -> wx:wx_object() when This :: wxToolBar(), ToolId :: integer(), Label :: unicode:chardata(), Bitmap1 :: wxBitmap:wxBitmap(), Option :: {bmpDisabled, wxBitmap:wxBitmap()} | {shortHelp, unicode:chardata()} | {longHelp, unicode:chardata()} | {data, wx:wx_object()}.
Adds a new check (or toggle) tool to the toolbar.
The parameters are the same as in addTool/6.
See: addTool/6
-spec addControl(This, Control) -> wx:wx_object() when This :: wxToolBar(), Control :: wxControl:wxControl().
Equivalent to addControl(This, Control, []).
-spec addControl(This, Control, [Option]) -> wx:wx_object() when This :: wxToolBar(), Control :: wxControl:wxControl(), Option :: {label, unicode:chardata()}.
Adds any control to the toolbar, typically e.g. a wxComboBox.
Remark: wxMac: labels are only displayed if wxWidgets is built with wxMAC_USE_NATIVE_TOOLBAR
set to 1
-spec addRadioTool(This, ToolId, Label, Bitmap1) -> wx:wx_object() when This :: wxToolBar(), ToolId :: integer(), Label :: unicode:chardata(), Bitmap1 :: wxBitmap:wxBitmap().
Equivalent to addRadioTool(This, ToolId, Label, Bitmap1, []).
-spec addRadioTool(This, ToolId, Label, Bitmap1, [Option]) -> wx:wx_object() when This :: wxToolBar(), ToolId :: integer(), Label :: unicode:chardata(), Bitmap1 :: wxBitmap:wxBitmap(), Option :: {bmpDisabled, wxBitmap:wxBitmap()} | {shortHelp, unicode:chardata()} | {longHelp, unicode:chardata()} | {data, wx:wx_object()}.
Adds a new radio tool to the toolbar.
Consecutive radio tools form a radio group such that exactly one button in the group is pressed at any moment, in other words whenever a button in the group is pressed the previously pressed button is automatically released. You should avoid having the radio groups of only one element as it would be impossible for the user to use such button.
By default, the first button in the radio group is initially pressed, the others are not.
See: addTool/6
-spec addSeparator(This) -> wx:wx_object() when This :: wxToolBar().
Adds a separator for spacing groups of tools.
Notice that the separator uses the look appropriate for the current platform so it can be a vertical line (MSW, some versions of GTK) or just an empty space or something else.
See:
-spec addStretchableSpace(This) -> wx:wx_object() when This :: wxToolBar().
Adds a stretchable space to the toolbar.
Any space not taken up by the fixed items (all items except for stretchable spaces) is distributed in equal measure between the stretchable spaces in the toolbar. The most common use for this method is to add a single stretchable space before the items which should be right-aligned in the toolbar, but more exotic possibilities are possible, e.g. a stretchable space may be added in the beginning and the end of the toolbar to centre all toolbar items.
See:
Since: 2.9.1
-spec addTool(This, Tool) -> wx:wx_object() when This :: wxToolBar(), Tool :: wx:wx_object().
Adds a tool to the toolbar.
Remark: After you have added tools to a toolbar, you must call realize/1 in order to have the
tools appear.
See:
-spec addTool(This, ToolId, Label, Bitmap) -> wx:wx_object() when This :: wxToolBar(), ToolId :: integer(), Label :: unicode:chardata(), Bitmap :: wxBitmap:wxBitmap().
Equivalent to addTool(This, ToolId, Label, Bitmap, []).
-spec addTool(This, ToolId, Label, Bitmap, BmpDisabled) -> wx:wx_object() when This :: wxToolBar(), ToolId :: integer(), Label :: unicode:chardata(), Bitmap :: wxBitmap:wxBitmap(), BmpDisabled :: wxBitmap:wxBitmap(); (This, ToolId, Label, Bitmap, [Option]) -> wx:wx_object() when This :: wxToolBar(), ToolId :: integer(), Label :: unicode:chardata(), Bitmap :: wxBitmap:wxBitmap(), Option :: {shortHelp, unicode:chardata()} | {kind, wx:wx_enum()}.
Adds a tool to the toolbar.
This most commonly used version has fewer parameters than the full version below which specifies the more rarely used button features.
Remark: After you have added tools to a toolbar, you must call realize/1 in order to have the
tools appear.
See:
-spec addTool(This, ToolId, Label, Bitmap, BmpDisabled, [Option]) -> wx:wx_object() when This :: wxToolBar(), ToolId :: integer(), Label :: unicode:chardata(), Bitmap :: wxBitmap:wxBitmap(), BmpDisabled :: wxBitmap:wxBitmap(), Option :: {kind, wx:wx_enum()} | {shortHelp, unicode:chardata()} | {longHelp, unicode:chardata()} | {data, wx:wx_object()}.
Adds a tool to the toolbar.
Remark: After you have added tools to a toolbar, you must call realize/1 in order to have the
tools appear.
See:
Removes the specified tool from the toolbar and deletes it.
If you don't want to delete the tool, but just to remove it from the toolbar (to possibly
add it back later), you may use removeTool/2 instead.
Note: It is unnecessary to call realize/1 for the change to take place, it will happen immediately.
Return: true if the tool was deleted, false otherwise.
See: deleteToolByPos/2
This function behaves like deleteTool/2 but it deletes the tool at the specified
position and not the one with the given id.
-spec enableTool(This, ToolId, Enable) -> ok when This :: wxToolBar(), ToolId :: integer(), Enable :: boolean().
Enables or disables the tool.
Remark: Some implementations will change the visible state of the tool to indicate that it is disabled.
See:
-spec findById(This, Id) -> wx:wx_object() when This :: wxToolBar(), Id :: integer().
Returns a pointer to the tool identified by id or NULL if no corresponding tool is
found.
-spec findControl(This, Id) -> wxControl:wxControl() when This :: wxToolBar(), Id :: integer().
Returns a pointer to the control identified by id or NULL if no corresponding control
is found.
-spec findToolForPosition(This, X, Y) -> wx:wx_object() when This :: wxToolBar(), X :: integer(), Y :: integer().
Finds a tool for the given mouse position.
Return: A pointer to a tool if a tool is found, or NULL otherwise.
Remark: Currently not implemented in wxGTK (always returns NULL there).
Returns the left/right and top/bottom margins, which are also used for inter-toolspacing.
See: setMargins/3
Returns the size of bitmap that the toolbar expects to have.
The default bitmap size is platform-dependent: for example, it is 1615 for MSW and 2424
for GTK. This size does not necessarily indicate the best size to use for the toolbars
on the given platform, for this you should use wxArtProvider::GetNativeSizeHint(wxART_TOOLBAR)
but in any case, as the bitmap size is deduced automatically from the size of the bitmaps
associated with the tools added to the toolbar, it is usually unnecessary to call setToolBitmapSize/2 explicitly.
Remark: Note that this is the size of the bitmap you pass to addTool/6, and not the eventual size
of the tool button.
See:
Called to determine whether a tool is enabled (responds to user input).
Return: true if the tool is enabled, false otherwise.
See: enableTool/3
-spec getToolLongHelp(This, ToolId) -> unicode:charlist() when This :: wxToolBar(), ToolId :: integer().
Returns the long help for the given tool.
See:
Returns the value used for packing tools.
See: setToolPacking/2
Returns the tool position in the toolbar, or wxNOT_FOUND if the tool is not found.
Returns the default separator size.
See: setToolSeparation/2
-spec getToolShortHelp(This, ToolId) -> unicode:charlist() when This :: wxToolBar(), ToolId :: integer().
Returns the short help for the given tool.
See:
Returns the size of a whole button, which is usually larger than a tool bitmap because of added 3D effects.
See:
Gets the on/off state of a toggle tool.
Return: true if the tool is toggled on, false otherwise.
See: toggleTool/3
-spec insertControl(This, Pos, Control) -> wx:wx_object() when This :: wxToolBar(), Pos :: integer(), Control :: wxControl:wxControl().
Equivalent to insertControl(This, Pos, Control, []).
-spec insertControl(This, Pos, Control, [Option]) -> wx:wx_object() when This :: wxToolBar(), Pos :: integer(), Control :: wxControl:wxControl(), Option :: {label, unicode:chardata()}.
Inserts the control into the toolbar at the given position.
You must call realize/1 for the change to take place.
See:
-spec insertSeparator(This, Pos) -> wx:wx_object() when This :: wxToolBar(), Pos :: integer().
Inserts the separator into the toolbar at the given position.
You must call realize/1 for the change to take place.
See:
-spec insertStretchableSpace(This, Pos) -> wx:wx_object() when This :: wxToolBar(), Pos :: integer().
Inserts a stretchable space at the given position.
See addStretchableSpace/1 for details about stretchable spaces.
See:
Since: 2.9.1
-spec insertTool(This, Pos, Tool) -> wx:wx_object() when This :: wxToolBar(), Pos :: integer(), Tool :: wx:wx_object().
-spec insertTool(This, Pos, ToolId, Label, Bitmap) -> wx:wx_object() when This :: wxToolBar(), Pos :: integer(), ToolId :: integer(), Label :: unicode:chardata(), Bitmap :: wxBitmap:wxBitmap().
Equivalent to insertTool(This, Pos, ToolId, Label, Bitmap, []).
-spec insertTool(This, Pos, ToolId, Label, Bitmap, [Option]) -> wx:wx_object() when This :: wxToolBar(), Pos :: integer(), ToolId :: integer(), Label :: unicode:chardata(), Bitmap :: wxBitmap:wxBitmap(), Option :: {bmpDisabled, wxBitmap:wxBitmap()} | {kind, wx:wx_enum()} | {shortHelp, unicode:chardata()} | {longHelp, unicode:chardata()} | {clientData, wx:wx_object()}.
Inserts the tool with the specified attributes into the toolbar at the given position.
You must call realize/1 for the change to take place.
See:
Return: The newly inserted tool or NULL on failure. Notice that with the overload taking tool
parameter the caller is responsible for deleting the tool in the latter case.
This function should be called after you have added tools.
-spec removeTool(This, Id) -> wx:wx_object() when This :: wxToolBar(), Id :: integer().
Removes the given tool from the toolbar but doesn't delete it.
This allows inserting/adding this tool back to this (or another) toolbar later.
Note: It is unnecessary to call realize/1 for the change to take place, it will happen immediately.
See: deleteTool/2
Set the values to be used as margins for the toolbar.
Remark: This must be called before the tools are added if absolute positioning is to be used, and the default (zero-size) margins are to be overridden.
See: getMargins/1
-spec setToolBitmapSize(This, Size) -> ok when This :: wxToolBar(), Size :: {W :: integer(), H :: integer()}.
Sets the default size of each tool bitmap.
The default bitmap size is 16 by 15 pixels.
Remark: This should be called to tell the toolbar what the tool bitmap size is. Call it before you add tools.
See:
-spec setToolLongHelp(This, ToolId, HelpString) -> ok when This :: wxToolBar(), ToolId :: integer(), HelpString :: unicode:chardata().
Sets the long help for the given tool.
Remark: You might use the long help for displaying the tool purpose on the status line.
See:
Sets the value used for spacing tools.
The default value is 1.
Remark: The packing is used for spacing in the vertical direction if the toolbar is horizontal, and for spacing in the horizontal direction if the toolbar is vertical.
See: getToolPacking/1
Sets the default separator size.
The default value is 5.
See: addSeparator/1
-spec setToolShortHelp(This, ToolId, HelpString) -> ok when This :: wxToolBar(), ToolId :: integer(), HelpString :: unicode:chardata().
Sets the short help for the given tool.
Remark: An application might use short help for identifying the tool purpose in a tooltip.
See:
-spec toggleTool(This, ToolId, Toggle) -> ok when This :: wxToolBar(), ToolId :: integer(), Toggle :: boolean().
Toggles a tool on or off.
This does not cause any event to get emitted.
Remark: Only applies to a tool that has been specified as a toggle tool.