View Source wxAuiManager (wx v2.4.3)
wxAuiManager
is the central class of the wxAUI class framework.
wxAuiManager
manages the panes associated with it for a particular wxFrame
, using
a pane's wxAuiPaneInfo
information to determine each pane's docking and floating behaviour.
wxAuiManager
uses wxWidgets' sizer mechanism to plan the layout of each frame. It
uses a replaceable dock art class to do all drawing, so all drawing is localized in one
area, and may be customized depending on an application's specific needs.
wxAuiManager
works as follows: the programmer adds panes to the class, or makes
changes to existing pane properties (dock position, floating state, show state, etc.). To
apply these changes, wxAuiManager
's update/1
function is called. This batch processing can be
used to avoid flicker, by modifying more than one pane at a time, and then "committing"
all of the changes at once by calling update/1
.
Panes can be added quite easily:
Later on, the positions can be modified easily. The following will float an existing pane in a tool window:
Layers, Rows and Directions, Positions
Inside wxAUI, the docking layout is figured out by checking several pane parameters. Four of these are important for determining where a pane will end up:
Direction: Each docked pane has a direction, Top, Bottom, Left, Right, or Center. This is fairly self-explanatory. The pane will be placed in the location specified by this variable.
Position: More than one pane can be placed inside of a dock. Imagine two panes being docked on the left side of a window. One pane can be placed over another. In proportionally managed docks, the pane position indicates its sequential position, starting with zero. So, in our scenario with two panes docked on the left side, the top pane in the dock would have position 0, and the second one would occupy position 1.
Row: A row can allow for two docks to be placed next to each other. One of the most common places for this to happen is in the toolbar. Multiple toolbar rows are allowed, the first row being row 0, and the second row 1. Rows can also be used on vertically docked panes.
Layer: A layer is akin to an onion. Layer 0 is the very center of the managed pane. Thus, if a pane is in layer 0, it will be closest to the center window (also sometimes known as the "content window"). Increasing layers "swallow up" all layers of a lower value. This can look very similar to multiple rows, but is different because all panes in a lower level yield to panes in higher levels. The best way to understand layers is by running the wxAUI sample.
Styles
This class supports the following styles:
wxAUI_MGR_ALLOW_FLOATING: Allow a pane to be undocked to take the form of a
wxMiniFrame
.wxAUI_MGR_ALLOW_ACTIVE_PANE: Change the color of the title bar of the pane when it is activated.
wxAUI_MGR_TRANSPARENT_DRAG: Make the pane transparent during its movement.
wxAUI_MGR_TRANSPARENT_HINT: The possible location for docking is indicated by a translucent area.
wxAUI_MGR_VENETIAN_BLINDS_HINT: The possible location for docking is indicated by gradually appearing partially transparent hint.
wxAUI_MGR_RECTANGLE_HINT: The possible location for docking is indicated by a rectangular outline.
wxAUI_MGR_HINT_FADE: The translucent area where the pane could be docked appears gradually.
wxAUI_MGR_NO_VENETIAN_BLINDS_FADE: Used in complement of wxAUI_MGR_VENETIAN_BLINDS_HINT to show the docking hint immediately.
wxAUI_MGR_LIVE_RESIZE: When a docked pane is resized, its content is refreshed in live (instead of moving the border alone and refreshing the content at the end).
wxAUI_MGR_DEFAULT: Default behaviour, combines: wxAUI_MGR_ALLOW_FLOATING | wxAUI_MGR_TRANSPARENT_HINT | wxAUI_MGR_HINT_FADE | wxAUI_MGR_NO_VENETIAN_BLINDS_FADE.
See:
This class is derived, and can use functions, from:
wxWidgets docs: wxAuiManager
Events
Event types emitted from this class:
Summary
Functions
Equivalent to addPane(This, Window, [])
.
Destroys the object
Tells the wxAuiManager
to stop managing the pane specified by window.
Returns an array of all panes managed by the frame manager.
Returns the current art provider being used.
Returns the current dock constraint values.
Returns the current ?wxAuiManagerOption's flags.
Returns the frame currently being managed by wxAuiManager
.
Calling this method will return the wxAuiManager
for a given window.
getPane/2
is used to lookup a wxAuiPaneInfo
object either by window pointer or by
pane name, which acts as a unique id for a window pane.
hideHint/1
hides any docking hint that may be visible.
Equivalent to insertPane(This, Window, Insert_location, [])
.
This method is used to insert either a previously unmanaged pane window into the frame manager, or to insert a currently managed pane somewhere else.
loadPaneInfo/3
is similar to LoadPerspective, with the exception that it only loads
information about a single pane.
Loads a saved perspective.
Constructor.
savePaneInfo/2
is similar to SavePerspective, with the exception that it only saves
information about a single pane.
Saves the entire user interface layout into an encoded wxString
(not implemented in
wx), which can then be stored by the application (probably using wxConfig).
Instructs wxAuiManager
to use art provider specified by parameter art\_provider
for
all drawing calls.
When a user creates a new dock by dragging a window into a docked position, often times the large size of the window will create a dock that is unwieldy large.
This method is used to specify ?wxAuiManagerOption's flags.
Called to specify the frame or window which is to be managed by wxAuiManager
.
This function is used by controls to explicitly show a hint window at the specified rectangle.
Dissociate the managed window from the manager.
This method is called after any number of changes are made to any of the managed panes.
Types
-type wxAuiManager() :: wx:wx_object().
Functions
-spec addPane(This, Window) -> boolean() when This :: wxAuiManager(), Window :: wxWindow:wxWindow().
Equivalent to addPane(This, Window, [])
.
-spec addPane(This, Window, [Option]) -> boolean() when This :: wxAuiManager(), Window :: wxWindow:wxWindow(), Option :: {direction, integer()} | {caption, unicode:chardata()}; (This, Window, Pane_info) -> boolean() when This :: wxAuiManager(), Window :: wxWindow:wxWindow(), Pane_info :: wxAuiPaneInfo:wxAuiPaneInfo().
addPane/4
tells the frame manager to start managing a child window.
There are several versions of this function. The first version allows the full spectrum of pane parameter possibilities. The second version is used for simpler user interfaces which do not require as much configuration. The last version allows a drop position to be specified, which will determine where the pane will be added.
-spec addPane(This, Window, Pane_info, Drop_pos) -> boolean() when This :: wxAuiManager(), Window :: wxWindow:wxWindow(), Pane_info :: wxAuiPaneInfo:wxAuiPaneInfo(), Drop_pos :: {X :: integer(), Y :: integer()}.
-spec destroy(This :: wxAuiManager()) -> ok.
Destroys the object
-spec detachPane(This, Window) -> boolean() when This :: wxAuiManager(), Window :: wxWindow:wxWindow().
Tells the wxAuiManager
to stop managing the pane specified by window.
The window, if in a floated frame, is reparented to the frame managed by wxAuiManager
.
-spec getAllPanes(This) -> [wxAuiPaneInfo:wxAuiPaneInfo()] when This :: wxAuiManager().
Returns an array of all panes managed by the frame manager.
-spec getArtProvider(This) -> wxAuiDockArt:wxAuiDockArt() when This :: wxAuiManager().
Returns the current art provider being used.
See: wxAuiDockArt
-spec getDockSizeConstraint(This) -> {Widthpct :: number(), Heightpct :: number()} when This :: wxAuiManager().
Returns the current dock constraint values.
See setDockSizeConstraint/3
for more information.
-spec getFlags(This) -> integer() when This :: wxAuiManager().
Returns the current ?wxAuiManagerOption's flags.
-spec getManagedWindow(This) -> wxWindow:wxWindow() when This :: wxAuiManager().
Returns the frame currently being managed by wxAuiManager
.
-spec getManager(Window) -> wxAuiManager() when Window :: wxWindow:wxWindow().
Calling this method will return the wxAuiManager
for a given window.
The window
parameter should specify any child window or sub-child window of the frame
or window managed by wxAuiManager
.
The window
parameter need not be managed by the manager itself, nor does it even need
to be a child or sub-child of a managed window. It must however be inside the window
hierarchy underneath the managed window.
-spec getPane(This, Name) -> wxAuiPaneInfo:wxAuiPaneInfo() when This :: wxAuiManager(), Name :: unicode:chardata(); (This, Window) -> wxAuiPaneInfo:wxAuiPaneInfo() when This :: wxAuiManager(), Window :: wxWindow:wxWindow().
getPane/2
is used to lookup a wxAuiPaneInfo
object either by window pointer or by
pane name, which acts as a unique id for a window pane.
The returned wxAuiPaneInfo
object may then be modified to change a pane's look, state
or position. After one or more modifications to wxAuiPaneInfo
, update/1
should be called to
commit the changes to the user interface. If the lookup failed (meaning the pane could not
be found in the manager), a call to the returned wxAuiPaneInfo
's IsOk() method will
return false.
-spec hideHint(This) -> ok when This :: wxAuiManager().
hideHint/1
hides any docking hint that may be visible.
-spec insertPane(This, Window, Insert_location) -> boolean() when This :: wxAuiManager(), Window :: wxWindow:wxWindow(), Insert_location :: wxAuiPaneInfo:wxAuiPaneInfo().
Equivalent to insertPane(This, Window, Insert_location, [])
.
-spec insertPane(This, Window, Insert_location, [Option]) -> boolean() when This :: wxAuiManager(), Window :: wxWindow:wxWindow(), Insert_location :: wxAuiPaneInfo:wxAuiPaneInfo(), Option :: {insert_level, integer()}.
This method is used to insert either a previously unmanaged pane window into the frame manager, or to insert a currently managed pane somewhere else.
insertPane/4
will push all panes, rows, or docks aside and insert the window into the position
specified by insert_location
.
Because insert_location
can specify either a pane, dock row, or dock layer, the insert_level
parameter is used to disambiguate this. The parameter insert_level
can take a value of
wxAUI_INSERT_PANE, wxAUI_INSERT_ROW or wxAUI_INSERT_DOCK.
-spec loadPaneInfo(This, Pane_part, Pane) -> ok when This :: wxAuiManager(), Pane_part :: unicode:chardata(), Pane :: wxAuiPaneInfo:wxAuiPaneInfo().
loadPaneInfo/3
is similar to LoadPerspective, with the exception that it only loads
information about a single pane.
This method writes the serialized data into the passed pane. Pointers to UI elements are not modified.
Note: This operation also changes the name in the pane information!
See: loadPerspective/3
See: savePaneInfo/2
See: savePerspective/1
-spec loadPerspective(This, Perspective) -> boolean() when This :: wxAuiManager(), Perspective :: unicode:chardata().
Equivalent to loadPerspective(This, Perspective, [])
.
-spec loadPerspective(This, Perspective, [Option]) -> boolean() when This :: wxAuiManager(), Perspective :: unicode:chardata(), Option :: {update, boolean()}.
Loads a saved perspective.
A perspective is the layout state of an AUI managed window.
All currently existing panes that have an object in "perspective" with the same name ("equivalent") will receive the layout parameters of the object in "perspective". Existing panes that do not have an equivalent in "perspective" remain unchanged, objects in "perspective" having no equivalent in the manager are ignored.
See: loadPaneInfo/3
See: loadPerspective/3
See: savePerspective/1
-spec new() -> wxAuiManager().
Equivalent to new([])
.
-spec new([Option]) -> wxAuiManager() when Option :: {managed_wnd, wxWindow:wxWindow()} | {flags, integer()}.
Constructor.
-spec savePaneInfo(This, Pane) -> unicode:charlist() when This :: wxAuiManager(), Pane :: wxAuiPaneInfo:wxAuiPaneInfo().
savePaneInfo/2
is similar to SavePerspective, with the exception that it only saves
information about a single pane.
Return: The serialized layout parameters of the pane are returned within the string. Information about the pointers to UI elements stored in the pane are not serialized.
See: loadPaneInfo/3
See: loadPerspective/3
See: savePerspective/1
-spec savePerspective(This) -> unicode:charlist() when This :: wxAuiManager().
Saves the entire user interface layout into an encoded wxString
(not implemented in
wx), which can then be stored by the application (probably using wxConfig).
See: loadPerspective/3
See: loadPaneInfo/3
See: savePaneInfo/2
-spec setArtProvider(This, Art_provider) -> ok when This :: wxAuiManager(), Art_provider :: wxAuiDockArt:wxAuiDockArt().
Instructs wxAuiManager
to use art provider specified by parameter art\_provider
for
all drawing calls.
This allows pluggable look-and-feel features. The previous art provider object, if any,
will be deleted by wxAuiManager
.
See: wxAuiDockArt
-spec setDockSizeConstraint(This, Widthpct, Heightpct) -> ok when This :: wxAuiManager(), Widthpct :: number(), Heightpct :: number().
When a user creates a new dock by dragging a window into a docked position, often times the large size of the window will create a dock that is unwieldy large.
wxAuiManager
by default limits the size of any new dock to 1/3 of the window size.
For horizontal docks, this would be 1/3 of the window height. For vertical docks, 1/3 of
the width.
Calling this function will adjust this constraint value. The numbers must be between 0.0 and 1.0. For instance, calling SetDockSizeContraint with 0.5, 0.5 will cause new docks to be limited to half of the size of the entire managed window.
-spec setFlags(This, Flags) -> ok when This :: wxAuiManager(), Flags :: integer().
This method is used to specify ?wxAuiManagerOption's flags.
flags
specifies options which allow the frame management behaviour to be modified.
-spec setManagedWindow(This, Managed_wnd) -> ok when This :: wxAuiManager(), Managed_wnd :: wxWindow:wxWindow().
Called to specify the frame or window which is to be managed by wxAuiManager
.
Frame management is not restricted to just frames. Child windows or custom controls are also allowed.
-spec showHint(This, Rect) -> ok when This :: wxAuiManager(), Rect :: {X :: integer(), Y :: integer(), W :: integer(), H :: integer()}.
This function is used by controls to explicitly show a hint window at the specified rectangle.
It is rarely called, and is mostly used by controls implementing custom pane drag/drop behaviour. The specified rectangle should be in screen coordinates.
-spec unInit(This) -> ok when This :: wxAuiManager().
Dissociate the managed window from the manager.
This function may be called before the managed frame or window is destroyed, but, since wxWidgets 3.1.4, it's unnecessary to call it explicitly, as it will be called automatically when this window is destroyed, as well as when the manager itself is.
-spec update(This) -> ok when This :: wxAuiManager().
This method is called after any number of changes are made to any of the managed panes.
update/1
must be invoked after addPane/4
or insertPane/4
are called in order to "realize" or "commit" the changes. In
addition, any number of changes may be made to wxAuiPaneInfo
structures (retrieved
with getPane/2
), but to realize the changes, update/1
must be called. This construction allows pane flicker
to be avoided by updating the whole layout at one time.