1  Erl_Interface User's Guide

1 Erl_Interface User's Guide

The Erl_Interface library contains functions that help you integrate programs written in C and Erlang. The functions in Erl_Interface support the following:

  • Manipulation of data represented as Erlang data types
  • Conversion of data between C and Erlang formats
  • Encoding and decoding of Erlang data types for transmission or storage
  • Communication between C nodes and Erlang processes
  • Backup and restore of C node state to and from Mnesia
Note

By default, the Erl_Interface library is only guaranteed to be compatible with other Erlang/OTP components from the same release as the libraries themselves. For information about how to communicate with Erlang/OTP components from earlier releases, see function ei_set_compat_rel.

In the following sections, these topics are described:

  • Compiling your code for use with Erl_Interface
  • Initializing Erl_Interface
  • Encoding, decoding, and sending Erlang terms
  • Building terms and patterns
  • Pattern matching
  • Connecting to a distributed Erlang node
  • Using the Erlang Port Mapper Daemon (EPMD)
  • Sending and receiving Erlang messages
  • Remote procedure calls
  • Using global names

It is assumed that the reader is familiar with the Erlang programming language.

To use any of the Erl_Interface functions, include the following line in your code:

#include "ei.h"    

Determine where the top directory of your OTP installation is. To find this, start Erlang and enter the following command at the Eshell prompt:

Eshell V4.7.4  (abort with ^G)
1> code:root_dir().
/usr/local/otp    

To compile your code, ensure that your C compiler knows where to find ei.h by specifying an appropriate -I argument on the command line, or add it to the CFLAGS definition in your Makefile. The correct value for this path is $OTPROOT/lib/erl_interface-$EIVSN/include, where:

  • $OTPROOT is the path reported by code:root_dir/0 in the example above.

  • $EIVSN is the version of the Erl_Interface application, for example, erl_interface-3.2.3.

Compiling the code:

$ cc -c -I/usr/local/otp/lib/erl_interface-3.2.3/include myprog.c    

When linking:

  • Specify the path to libei.a with -L$OTPROOT/lib/erl_interface-3.2.3/lib.
  • Specify the name of the library with -lei.

Do this on the command line or add the flags to the LDFLAGS definition in your Makefile.

Linking the code:

$ ld -L/usr/local/otp/lib/erl_interface-3.2.3/
                            lib myprog.o -lei -o myprog    

On some systems it can be necessary to link with some more libraries (for example, libnsl.a and libsocket.a on Solaris, or wsock32.lib on Windows) to use the communication facilities of Erl_Interface.

If you use the Erl_Interface functions in a threaded application based on POSIX threads or Solaris threads, then Erl_Interface needs access to some of the synchronization facilities in your threads package. You must specify extra compiler flags to indicate which of the packages you use. Define _REENTRANT and either STHREADS or PTHREADS. The default is to use POSIX threads if _REENTRANT is specified.

Before calling any of the other functions in the library, initialize it by calling ei_init() exactly once.

Data sent between distributed Erlang nodes is encoded in the Erlang external format. You must therefore encode and decode Erlang terms into byte streams if you want to use the distribution protocol to communicate between a C program and Erlang.

The Erl_Interface library supports this activity. It has several C functions that create and manipulate Erlang data structures. The following example shows how to create and encode an Erlang tuple {tobbe,3928}:

ei_x_buff buf;
ei_x_new(&buf);
int i = 0;
ei_x_encode_tuple_header(&buf, 2);
ei_x_encode_atom(&buf, "tobbe");
ei_x_encode_long(&buf, 3928);    

For a complete description, see the ei module.

The previous example can be simplified by using the ei_x_format_wo_ver function to create an Erlang term:

ei_x_buff buf;
ei_x_new(&buf);
ei_x_format_wo_ver(&buf, "{~a,~i}", "tobbe", 3928);    

For a complete description of the different format directives, see the the ei_x_format_wo_ver function.

The following example is more complex:

ei_x_buff buf;
int i = 0;
ei_x_new(&buf);
ei_x_format_wo_ver(&buf,
                   "[{name,~a},{age,~i},{data,[{adr,~s,~i}]}]",
                   "madonna",
                   21,
                  "E-street", 42);
ei_print_term(stdout, buf.buff, &i);
ei_x_free(&buf);      

As in the previous examples, it is your responsibility to free the memory allocated for Erlang terms. In this example, ei_x_free() ensures that the data pointed to by buf is released.

To connect to a distributed Erlang node, you must first initialize the connection routine with one of the ei_connect_init_* functions, which stores information, such as the hostname, and node name for later use:

int identification_number = 99;
int creation=1;
char *cookie="a secret cookie string"; /* An example */
const char* node_name = "einode@durin";
const char *cookie = NULL;
short creation = time(NULL) + 1;
ei_cnode ec;
ei_connect_init(&ec,
                node_name,
                cookie,
                creation);    

For more information, see the ei_connect module.

After initialization, you set up the connection to the Erlang node. To specify the Erlang node you want to connect to, use the ei_connect_*() family of functions. The following example sets up the connection and is to result in a valid socket file descriptor:

int sockfd;
const char* node_name = "einode@durin"; /* An example */
if ((sockfd = ei_connect(&ec, nodename)) < 0)
  fprintf(stderr, "ERROR: ei_connect failed");    

erts:epmd is the Erlang Port Mapper Daemon. Distributed Erlang nodes register with epmd on the local host to indicate to other nodes that they exist and can accept connections. epmd maintains a register of node and port number information, and when a node wishes to connect to another node, it first contacts epmd to find the correct port number to connect to.

When you use ei_connect to connect to an Erlang node, a connection is first made to epmd and, if the node is known, a connection is then made to the Erlang node.

C nodes can also register themselves with epmd if they want other nodes in the system to be able to find and connect to them.

Before registering with epmd, you must first create a listen socket and bind it to a port. Then:

int pub;

pub = ei_publish(&ec, port);    

pub is a file descriptor now connected to epmd. epmd monitors the other end of the connection. If it detects that the connection has been closed, the node becomes unregistered. So, if you explicitly close the descriptor or if your node fails, it becomes unregistered from epmd.

Notice that on some systems a failed node is not detected by this mechanism, as the operating system does not automatically close descriptors that were left open when the node failed. If a node has failed in this way, epmd prevents you from registering a new node with the old name, as it thinks that the old name is still in use. In this case, you must close the port explicitly

Use one of the following two functions to send messages:

As in Erlang, messages can be sent to a pid or to a registered name. It is easier to send a message to a registered name, as it avoids the problem of finding a suitable pid.

Use one of the following two functions to receive messages:

In the following example, {Pid, hello_world} is sent to a registered process my_server:

ei_x_buff buf;
ei_x_new_with_version(&buf);

ei_x_encode_tuple_header(&buf, 2);
ei_x_encode_pid(&buf, ei_self(ec));
ei_x_encode_atom(&buf, "Hello world");

ei_reg_send(&ec, fd, "my_server", buf.buff, buf.index);

The first element of the tuple that is sent is your own pid. This enables my_server to reply. For more information about the primitives, see the ei_connect module.

In this example, {Pid, Something} is received.

erlang_msg msg;
int index = 0;
int version;
int arity = 0;
erlang_pid pid;
ei_x_buff buf;
ei_x_new(&buf);
for (;;) {
  int got = ei_xreceive_msg(fd, &msg, &x);
  if (got == ERL_TICK)
    continue;
  if (got == ERL_ERROR) {
    fprintf(stderr, "ei_xreceive_msg, got==%d", got);
    exit(1);
  }
  break;
}
ei_decode_version(buf.buff, &index, &version);
ei_decode_tuple_header(buf.buff, &index, &arity);
if (arity != 2) {
  fprintf(stderr, "got wrong message");
  exit(1);
}
ei_decode_pid(buf.buff, &index, &pid);     

To provide robustness, a distributed Erlang node occasionally polls all its connected neighbors in an attempt to detect failed nodes or communication links. A node that receives such a message is expected to respond immediately with an ERL_TICK message. This is done automatically by ei_xreceive_msg(). However, when this has occurred, ei_xreceive_msg returns ERL_TICK to the caller without storing a message into the erlang_msg structure.

When a message has been received, it is the caller's responsibility to free the received message.

For more information, see the ei_connect and ei modules.

An Erlang node acting as a client to another Erlang node typically sends a request and waits for a reply. Such a request is included in a function call at a remote node and is called a remote procedure call.

The following example checks if a specific Erlang process is alive:

int index = 0, is_alive;
ei_x_buff args, result;

ei_x_new(&result);
ei_x_new(&args);
ei_x_encode_list_header(&args, 1);
ei_x_encode_pid(&args, &check_pid);
ei_x_encode_empty_list(&args);

if (ei_rpc(&ec, fd, "erlang", "is_process_alive",
           args.buff, args.index, &result) < 0)
    handle_error();

if (ei_decode_version(result.buff, &index) < 0
    || ei_decode_bool(result.buff, &index, &is_alive) < 0)
    handle_error();    

For more information about ei_rpc() and its companions ei_rpc_to() and ei_rpc_from(), see the ei_connect module.

A C node has access to names registered through the global module in Kernel. Names can be looked up, allowing the C node to send messages to named Erlang services. C nodes can also register global names, allowing them to provide named services to Erlang processes or other C nodes.

Erl_Interface does not provide a native implementation of the global service. Instead it uses the global services provided by a "nearby" Erlang node. To use the services described in this section, it is necessary to first open a connection to an Erlang node.

To see what names there are:

char **names;
int count;
int i;

names = ei_global_names(&ec,fd,&count);

if (names) 
  for (i=0; i<count; i++) 
    printf("%s\n",names[i]);

free(names);    

ei_global_names allocates and returns a buffer containing all the names known to the global module in Kernel. count is initialized to indicate the number of names in the array. The array of strings in names is terminated by a NULL pointer, so it is not necessary to use count to determine when the last name is reached.

It is the caller's responsibility to free the array. ei_global_names allocates the array and all the strings using a single call to malloc(), so free(names) is all that is necessary.

To look up one of the names:

ETERM *pid;
char node[256];
erlang_pid the_pid;

if (ei_global_whereis(&ec,fd,"schedule",&the_pid,node) < 0)
   fprintf(stderr, "ei_global_whereis error\n");    

If "schedule" is known to the global module in Kernel, an Erlang pid is written to the_pid. This pid that can be used to send messages to the schedule service. Also, node is initialized to contain the name of the node where the service is registered, so that you can make a connection to it by simply passing the variable to ei_connect.

Before registering a name, you should already have registered your port number with epmd. This is not strictly necessary, but if you neglect to do so, then other nodes wishing to communicate with your service cannot find or connect to your process.

Create a name that Erlang processes can use to communicate with your service:

ei_global_register(fd,servicename,ei_self(ec));    

After registering the name, use ei_accept to wait for incoming connections.

Note

Remember to free pid later with ei_x_free.

To unregister a name:

ei_global_unregister(&ec,fd,servicename);